Telescopic Waterways

• Amity Machine produces waterways with 2-sections through 6-sections with tube sizes 2 1/2" O.D. thru 7" O.D. Amity Machine can produce telescopic waterways from 3' to 100 meters in length.
• All tubes are inspected for straightness of .01 per foot deviation. The diameter of each tube is inspected for ovality. All tubes are inspected for visual defects such as dents, pits, and scratches.
• All tubes that telescope are duranodic coated with a 1mil coating thickness. This coating is resistant to extreme exposure conditions and abrasive actions.
• Amity Machine uses seals made of Nitroxile. Nitroxile is suitable for general hydraulic service in petroleum based fluids, water-oil emulsions, water-glycol fluids, water based fluids. The temperature range is -40deg F to 250deg F. By using this seal, our waterways are able to seal in all conditions, all around the world.
• All components welded to the waterway are manufactured at Amity Machine.
• Amity Machine can provide custom mounting of the waterway per customer request.
• All waterways are assembled using Castrol PD 1+ PD 2 grease.
• All waterways are greased at Amity Machine, so greasing of the waterway after installation is not necessary.
• All waterways are hydrostatically pressure tested to ensure there are no leaks when the waterway leaves Amity Machine.
• Amity Machine's waterways are rated at a working pressure of 250psi and flow up to 2000gpm.
• All of Amity Machine's waterways carry a one year warranty. Refer to Amity Machine's standard warranty for details.